ABSTRACT8 C; _+ P) _* ^2 _
The paper presents a high speed balancing facility case history of a generator rotor with a long turbine end overhang. The rotor had experienced rapid increase in vibration at 3600 RPM and amplitude hysteresis at the 2nd mode between run-up and run-down during shop balancing. This behavior raised concerns about the possibility of excessive generator rotor vibration on site.
/ R0 f! I7 {1 w1 wA rotor-bearing-support system model was created to study the observed generator behavior in the balance facility. Critical speed, unbalance response and damped eigenvalue analyses were performed. Examination of the rotor kinetic and potential energies for the 2nd mode showed that over 78% of the rotor 2nd mode kinetic energy was associated with the overhang. The analysis indicated that when the rotor operated at 3600 RPM, between the 2nd and 3rd modes, the overhang motion increased due to amplification of both modes and very little damping. As a result, vibration at the bearings increased and when the rotor decelerated through the 2nd mode the increased motion on the coupling generated excessive vibration.# B- J2 [( {% R7 d4 ?) Q
The model was modified by adding coupling constraints to represent operating conditions of this rotor in the unit. The 2nd mode was shifted out of operating speed range, which was confirmed by the field operation.
" Z( r! K: G9 g: Y8 f# |Two rotors were balanced and both are now operating with acceptable vibration levels.
1 P( A) A& Z* _- B+ _. hThis paper illustrates how rotor dynamics analysis help to explain unusual rotor behavior and provided assurance that vibration performance of this rotor on site will not be affected.2 Y+ m& x  \+ j2 k& a
Vibration plots from the balancing facility, DyRoBes models, critical speed analysis, unbalance response plots, and field vibration data are included as illustrations.
7 L# ?5 Z, z  B6 u! ]4 HKeywords: high speed balancing, rotor dynamics, mode shape, unbalance response, critical speed analysis.

能说一下论文的作者吗？谢谢楼主

哪里有试用版的软件呀,可以说吗,我要用,谢谢

是否有这个分析软件下载?在何处?

我们不仅仅需要知道有这样的软件，更关心的是能不能找到这样的软件

什么东西，论文焉叫软件

引用:

原帖由 ssqing 于 2008-7-20 20:13 发表
; I8 Z* p; W6 N6 d9 c 什么东西，论文焉叫软件

" z7 Z% ~- Q- l7 H3 g, Z/ m我刚看了一下,虽然我看不懂那么多的英文,但是,我感觉应该是一个论文,或者是一个转子动力学软件的应用方法的介绍文章.请不要生那么大的气,呵呵气坏了身体是自己的!

看不懂,看不懂