[分享] 离心泵叶轮CAD系统开发

离心泵叶轮CAD系统开发泵阀技术(论坛)http://www.lanbeng-pump.net
吴婷,张礼兵本文章来源于:泵阀技术论坛--http://www.lanbeng-pump.net/
(安徽建筑工业学院机电系,合肥230601)泵阀技术(论坛)http://www.lanbeng-pump.net
摘要　建立Windows环境下的离心泵叶轮三维CAD系统,该系统运用Visual C ++ ,选择Pro /E为支撑软件,根据离心泵
转载请注明出处：http://www.lanbeng-pump.net水力设计原则,完成了从离心泵基本设计参数的输入、计算到叶轮轴面图生成这一整套的参数化CAD过程,并生成Pro /泵阀技术(论坛)http://www.lanbeng-pump.net
E接口文件,然后在Pro /E中实现叶轮空间扭曲叶片的三维实体造型设计,摒弃了传统生成叶轮二维木模图的方法。本文章来源于:泵阀技术论坛--http://www.lanbeng-pump.net/
关键词:离心泵　叶轮　CAD　Pro /E泵阀技术(论坛)http://www.lanbeng-pump.net
中图分类号: TH311　文献标识码:A　文章编号: 1671—3133 (2006) 03—0046—04泵阀技术论坛 (兰泵论坛)http://www.lanbeng-pump.net
Development of 3D CAD system on cen tr ifuga l pump impeller泵阀技术论坛http://www.lanbeng-pump.net
Wu Ting, Zhang Libing泵阀技术论坛 (兰泵论坛)http://www.lanbeng-pump.net
(Department ofMechanical and Electric, Anhui Institute of Architecture & Industry, Hefei, 230022, CHN)本文章来源于:泵阀技术论坛--http://www.lanbeng-pump.net/
Abstract　A centrifugal pump impeller CAD system is established in the environment ofWindows. By using the object2oriented本文章来源于:www.lanbeng-pump.net/
p rogramming language Visual C ++ and supporting with Pro /E, the system can achieve the whole parameterized CAD p rocess泵阀技术(论坛)http://www.lanbeng-pump.net
from the centrifugal pump basic dimension input, computation to the axial drawing of the impeller. And it can also create the in2本文章来源于:www.lanbeng-pump.net/
terface file of Pro /E, and then can in Pro /E achieve 3D molding of the impeller, which abandon the traditional impeller 2D泵阀技术论坛http://www.lanbeng-pump.net
wooden2mold drawing.转载请注明出处：http://www.lanbeng-pump.net
Key words:Centrifugal pump　Impeller　CAD　Pro /E